skip to Main Content

Rubber Press Molding

Compression, Transfer and Injection Molding ranging from 100—800 tons using proprietary compounds proven and qualified for specific applications with custom formulations available. Rubber-to-metal bonding and rubber-to-fabric bonding capabilities. Design and engineering assistance available.

Rubber Materials include:

  • Open and closed cell sponge
  • Solid (dense) rubber
  • Fluoroelastomers, EPDM, Neoprene, Nitrile, Polyisoprene, Natural Rubber, SBR, Silicone
  • FDA, AREMA, AMS, SAE, ASTM, AASHTO, UL and Military specifications available
  • Hooded vacuum chamber
  • Lower cost tooling
  • Small to mid-size quantities
  • Parts with large and/or basic cross-sections
    • Precision tolerances not required
  • Rubber to metal or to fabric bonding required
  • Material with high hardness
  • Hooded vacuum chamber
  • No “individual” preforms
    • One preform fills many cavities
  • Fast cycle times
  • Less environmental impact
  • Tighter dimension tolerances
  • Small, less visible parting lines
  • No preforms required
  • Very fast cycle times
  • Less environmental impact
    • Low scrap
  • Tighter dimension tolerances
    • High precision parts
  • High volume production
  • Small, precise parts

Rubber Extruding

Rubber Materials include:

  • Sponge and solid (dense) rubber
  • EPDM, Neoprene, Nitrile, SBR, Natural Rubber, Polyisprene, Silicone, Fluoroelastomer

Capabilities include:

  • Custom profiles
  • PSA/heat- activated taping
  • Co-extruding (dual durometers and materials)
  • Encapsulated cord and wire
  • Flocking and urethane slip coating
  • Lathe cutting
  • Secondary Vulcanization (butt-splicing, compression, injection)
Back To Top